< >

0.3-3.3mm HDPE Geomembrane

HDPE geomembrane is produced by three-layer co-blowing process or calendering process. It is an effective waterproof barrier engineering material.

1. Excellent anti-penetration performance, waterproof, anti-seepage and isolation

2.High chemical corrosion resistance

3. Better impact resistance and wear resistance

Contact Now E-Mail Telephone WhatsApp

Product Details

HDPE geomembrane is a geotechnical material made of high-density polyethylene.

Material: HDPE

Thickness: 0.2-3mm

Width: 1-8m

Length: according to customer needs

Features:

1. Resistant to chemical corrosion: HDPE geomembrane has notable resistance to chemical corrosion such as acids, alkalis, salts, etc., and is gorgeous for especially a broad range soil environments.
2. High strength: HDPE geomembrane has terrific tensile power and tear resistance and can face up to large hundreds and extrusion forces in projects.
3. Good durability: HDPE geomembrane has right neighborhood climate resistance, can face up to ultraviolet radiation and the penalties of close by local weather change, and maintain tightly closed frequent common overall performance of the material.
4. Poor water permeability: HDPE geomembrane is clearly impermeable, can acquire quality anti-penetration and isolation effects, and is great for initiatives that require anti-penetration.
5. Good environmental protection: HDPE geomembrane is made of environmentally brilliant materials. It is non-toxic, odorless and recyclable, and will now no longer purpose air air pollution to the surroundings

0.3-3.3HDPE Geomembrane

Application:

1. Water conservancy projects: HDPE geomembrane is fantastic for the improvement of anti-seepage and isolation layers in channels, reservoirs, anti-seepage walls, etc. in water conservancy projects.
2. Soil air air pollution prevention and control: HDPE geomembrane can be used as the isolation layer at the bottom and sides of soil air air pollution prevention and manipulate duties to stop the penetration and unfold of pollutants.
3. Basic engineering: HDPE geomembrane can be used as a waterproof isolation layer in basements, underground cities and exclusive major projects.
4. Artificial lakes and breeding: HDPE geomembrane can be used as the anti-permeability layer in artificial lakes, pools, breeding and one-of-a-kind places to make positive that the water physique does now now not leak and seep.
5. Landfills: HDPE geomembranes can be used as anti-seepage layers in landfills to end waste leakage and groundwater pollution.5. Landfills: HDPE geomembranes can be used as anti-seepage layers in landfills to stop waste leakage and groundwater pollution.

0.3-3.3HDPE Geomembrane

Specifications:

HDPE Geomembrane Technical Parameter (GRI GM13 ASTM Standard)
Spec Properties	Test method ASTM	GMS0.2	GMS0.5	GMS0.75	GMS1.0	GMS1.25	GMS1.5	GMS2.0	GMS2.5	GMS3.0
Thickness	D5199	0.2mm	0.5mm	0.75mm	1.00mm	1 .25mm	1.50mm	2.00mm	2.50mm	3.00mm
Density (≥ g/cc)	D1505	0.94	0.940	0.940	0.940	0.940	0.940	0.940	0.940	0.94
Tensile Properties (Each direction)(≥) • yield strength • break strength • yield elongation • break elongation	D6693 Type IV	3 kN/m 5 kN/m 12% 700%	8 kN/m 14 kN/m 12% 700%	11 kN/m 20 kN/m 12% 700%	15 kN/m 27 kN/m 12% 700%	18 kN/m 33 kN/m 12% 700%	22 kN/m 40 kN/m 12% 700%	29kN/m 53 KN/m 12% 700%	37kN/m 67kN/m 12% 700%	44kN/m 80kN/m 12% 700%
Tear Resistance (≥)	D 1004	25N	64N	93N	125 N	156N	187N	249 N	311 N	374 N
Puncture Resistance(≥)	D 4833	64N	160N	240N	320 N	400 N	480N	640 N	800 N	960 N
Stress Crack Resistance (≥)	D 5397	500 hr	500 hr	500 hr	500 hr	500 hr	500 hr	500 hr	500 hr	500 hr
Carbon Black Content	D 1603	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%
Carbon Black Dispersion	D 5596	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)
Oxidative Induction Time(OIT)(≥) (a)Standard OIT ——or—— (b)High Pressure OIT	D 3895 D 5885	100min 500min	100 min 500 min	100 min 500 min	100 min 500 min	100 min 500 min	100 min 500 min	100 min 500 min	100 min 500 min	100 min 500 min